Continental 75-P Performance 12V SLI Battery

Continental

The Continental 75-P Performance 12V SLI Battery by Continental Batteries is an industry leading SLI Battery with multiple terminal options to fit your application. Click the Terminal Options Tab for details. Shop online, shop with confidence at Advantage Batteries.

Buy Online Pickup In-Store
Typical Application: Automotive

$112.99

Continental 75-P Performance 12V SLI Battery

Advantage Batteries supplies the Continental 75-P Performance as a factory-activated 12-volt SLI (Starting, Lighting, Ignition) replacement for vehicles that specify BCI Group 75. This is a flooded lead-acid automotive starter, not a deep-cycle or AGM pack. It is sold for cranking duty: 550 SAE cold cranking amps, 660 SAE cranking amps, and 80 minutes of reserve capacity in a Group 75 case with side-terminal Type S posts.

Use this SKU when the application calls for Group 75, 12 volts, flooded SLI chemistry, and side terminals. Confirm group size, tray dimensions, terminal style, and cable reach before purchase. Group 75 is not a substitute for Group 78, 34/78, 65, or 86 unless the vehicle also lists Group 75. If the vehicle lists a different BCI group or uses top posts only, this unit will not be a correct fit.

Shop the Continental 75-P online or pick it up at a qualifying Advantage Batteries location.

Technical specifications

Electrical and physical values below are from Continental’s 75-P data sheet. Warranty is from the Continental 75-P product page.

Specification Value
Brand Continental
SKU / part number 75-P
Product line Performance
Application type Automotive SLI (starting battery)
BCI group size 75
Nominal voltage 12 V (12.6 V on data sheet)
SAE CCA (−18°C / 0°F) 550 A
SAE CA (0°C / 32°F) 660 A
SAE reserve capacity (27°C / 80°F) 80 min
20-hour capacity 51 Ah
Battery chemistry Flooded lead-acid
Case dimensions (L × W × H) 9.40 × 6.92 × 7.19 in (238.8 × 175.8 × 182.6 mm)
Weight 30.83 lb (14 kg)
Terminal type Side terminal Type S
Terminal polarity + −
Handle Yes
Container / cover Polypropylene
Separator Polyethylene
Positive grid alloy Lead calcium tin
Negative grid alloy Lead calcium
Electrolyte specific gravity range 1.270–1.300
Maximum discharge current 1,000 A (5 sec)
Activation Factory-activated
Group 75 sets length, width, height, and hold-down geometry. At 9.40 × 6.92 × 7.19 in and 30.83 lb, the 75-P is built to that envelope with Type S side terminals. Flooded lead-acid cells require an upright install and a tray that can handle liquid electrolyte. Do not treat this SKU as sealed AGM or as a cycling battery for accessories, inverters, or golf cars.

Warranty

Continental backs the 75-P Performance with an 18-month manufacturer warranty. That term is the one published on the Continental 75-P product page. It is not a 24-month Supreme-line term and not an Advantage Batteries house warranty unless stated separately at checkout.

Warranty coverage follows the manufacturer’s policy: defects in materials and workmanship for the published period when the battery is used as an automotive SLI unit in a matching Group 75 application. Abuse, deep discharge, incorrect group size, or use outside SLI duty typically voids coverage. Keep the purchase record. File a claim through Advantage Batteries or Continental per the policy in effect at sale.

Fitment and install notes

  • Match BCI Group 75 on the existing battery or in the vehicle’s battery spec. Do not substitute a Group 78 or Group 34/78 because CCA looks similar.
  • Confirm side-terminal Type S cables. This data sheet does not list top posts. Top-post-only vehicles need a different SKU.
  • Measure the tray against 9.40 × 6.92 × 7.19 in before ordering.
  • Continental also lists a dual-group 75/86-P. Use 75-P when the vehicle specifies Group 75 and you need the published Type S side-terminal 75-P data sheet. Use 75/86-P only if the vehicle accepts that dual group and you have verified terminals on the unit being replaced.
  • This is a flooded battery. Keep it upright. Do not mount on its side.
  • Factory-activated means it ships wet and charged for install; still verify open-circuit voltage and charge if it has sat.
  • After install, seat the hold-down and confirm cable polarity before the first start.

Order the Continental 75-P from Advantage Batteries

Advantage Batteries is an authorized Continental distributor. The 75-P Performance 12V SLI battery is available to order online, with in-store pickup at qualifying locations where stock allows.

About Continental Batteries

As a reliable battery distributor since 1932, Continental Battery Co stands on the same principles and ethics it was founded on. Our customer relationships have allowed us to embrace tremendous growth, expanding to over 90 Nationwide Branches and allowing for distribution to over 25,000 dealer locations.

Continental Battery
SKU: 75-P Category: Tag: Brand:
Weight 30.83 lbs
Dimensions 9.4 × 6.92 × 7.19 in
Brands

Continental

Voltage

12V

Terminal Options

8

CCA Rating

550

Reserve Capacity (Minutes)

80

BCI Group Size

75

Ah Rating (@100 Hr)

N/A

Ah Rating (@20Hr)

N/A

Application

Automotive

Terminal Options Guide

Option Code Description A.K.A.
1 Embedded Low Profile Type M
2 Embedded High Profile
3 Embedded Automotive Post
4 Embedded Universal/Reverse Type J
5 L-Terminal
6 Automotive Post & Stud/Standard Standard
7 Universal
8 Automotive SAE Type A
9 Wingnut
10 Dual Wingnut
11 Stud/Commercial SS Type Commercial SS Type
12 Cable & Plug
13 M8-1.25 Threaded Hole
14 Industrial
15 6mm/8mm Insert Insert
16 Small L-Terminal
17 5/16″-18 Stud & 1/4″-20 Threaded Hole
18 M6-1.0 Threaded Hole
19 Type B1/B2
20 BUS

Advantage Batteries | Terminal Options

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Continental 75-P Performance 12V SLI Battery”

There are no reviews yet.

Select at least 2 products
to compare